Project Files of nRF52840 Dongle Library for Proteus: Bluetooth LE USB Simulation
b64619b1f1d74c048916123cffdbb70e.zip

nRF52840 Dongle Library for Proteus V1.0
nRF52840 Dongle Library for Proteus V1.0 comes as a ZIP archive of 313 files (3.2 MB, 7.3 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, an Arduino sketch, an Arduino library, compiled HEX firmware and source code.
- LIBProteus library
- DLLProteus model
- DSNProteus simulation
- INOArduino sketch
- LIBArduino library
- HEXHEX firmware
- SRCSource code
Description
nRF52840-Dongle-Library-for-Proteus-v1.0.zip with Nordic's nRF52840 Dongle in Proteus (your sketch with LED0, the RGB LED1 and SW1, Bluetooth LE to a phone and a serial monitor; TEPDONGLE52.LIB, TEPNET.DLL and the TEP Boards for Proteus add-on 1.83.0), the phone library, the busy light demo with its sketch and a README.
File Structure
3.7 KB1.1 KB7.7 KB11 KB8.5 KB1.5 KB1.7 KB1.9 KB5.7 KB4.9 KB1.1 KB5.8 KB9.6 KB7.2 KB2.5 KB2.1 KB1.9 KB2.1 KB4.4 KB1.1 KB3 KB3 KB1.8 KB2.5 KB3.5 KB149 B2.7 KB2 KB6.4 KB3.2 KB1.3 KB963 B8.6 KB5.9 KB6 KB12 KB1.6 KB1.3 KB14.7 KB4.3 KB6.1 KB20.1 KB8.2 KB2 KB4.5 KB311 B12.8 KB6.7 KB6.1 KB2.2 KB3.4 KB5.9 KB1.5 KB1.6 KB16.6 KB9.7 KB6.9 KB2.1 KB533 B5.7 KB7.4 KB514 B1.7 KB896 B481 B1.4 KB1012 B482 B936 B559 B467 B3.6 KB3.8 KB504 B956 B575 B455 B8.3 KB10.9 KB522 B79 B5.5 KB3.1 KB79 B442 B918 B1.4 KB1.8 KB1 KB1.3 KB1.4 KB1.8 KB1.4 KB5.7 KB502 B463 B5 KB6.5 KB3.4 KB3.4 KB500 B1.6 KB368 B406 B466 B404 B444 B460 B477 B739 B448 B1.3 KB350 B5.7 KB4 KB562 B1.5 KB2 KB550 B7.2 KB4.1 KB371 B4.5 KB3.5 KB492 B390 B478 B6.6 KB2.4 KB479 B5.1 KB1.9 KB1.3 KB1.3 KB750 B1.3 KB490 B2.2 KB1.9 KB498 B1.2 KB1.2 KB487 B5.1 KB4.6 KB371 B3.6 KB2.5 KB534 B1.5 KB1.2 KB478 B6.2 KB3 KB1.5 KB1.7 KB469 B1 KB1.7 KB433 B294 B358 B1.3 KB2.5 KB13.2 KB3.8 KB659 B510 B4.4 KB1.9 KB5.8 KB11 KB835 B518 B308 B1.3 KB3.3 KB568 B6.4 KB2.3 KB29 B436 B9.2 KB4.9 KB439 B4.2 KB1.5 KB9.3 KB7.1 KB4.7 KB2.4 KB388 B5.1 KB893 B667 B1.3 KB5.5 KB2.3 KB1.8 KB468 B882 B530 B791 B487 B894 B2 KB730 B646 B2.6 KB977 B702 B20.6 KB1.8 KB11.8 KB3.2 KB596 B406 B6.3 KB5.7 KB9.3 KB7.7 KB7.7 KB6.1 KB5.8 KB5.9 KB6.4 KB6.4 KB5.3 KB5.6 KB5.7 KB7.9 KB7.7 KB6.5 KB6.3 KB6.2 KB6.4 KB5.9 KB10.3 KB8.5 KB6.6 KB7.6 KB6.7 KB6.1 KB6.7 KB8.3 KB6.2 KB7.2 KB6.2 KB5.9 KB5.6 KB5.7 KB6.7 KB5.9 KB6.2 KB6 KB6 KB6.1 KB6.3 KB6 KB6.1 KB6.2 KB6 KB5.8 KB6.4 KB6.4 KB3.8 KB6.4 KB6.4 KB6.9 KB6 KB6.8 KB7 KB6.3 KB6.4 KB6.5 KB6.5 KB6.6 KB6.5 KB5.9 KB6.1 KB5.6 KB6.6 KB5.9 KB7.5 KB3.8 KB4.4 KB5.4 KB7.7 KB7.1 KB5.8 KB5.9 KB5.9 KB6.9 KB5.7 KB5.9 KB5.8 KB5.5 KB5.5 KB7.1 KB5.2 KB40.8 KB25.9 KB1.3 KB8.5 KB37.2 KB22.8 KB39.5 KB13.1 KB3.0 MB28.7 KB15.6 KB3.0 MB11 KBGallery12 images from the tutorialOpen the tutorial
The circuit, the board and the results as they appear in nRF52840 Dongle Library for Proteus: Bluetooth LE USB Simulation. Open an image for its full size.












README
NRF52840 DONGLE LIBRARY FOR PROTEUS - V1.0 (YOUR ARDUINO SKETCH, BLUETOOTH LE TO A PHONE, THE RGB LED AND SW1)
Designed by The Engineering Projects
www.TheEngineeringProjects.com
IMPORTANT LINKS
Article (read it first - pictures, step by step, every feature explained):
https://www.theengineeringprojects.com/2026/11/nrf52840-dongle-library-for-proteus.html
Report a bug or suggest a feature (our forum):
https://www.theengineeringprojects.com/forum
The demo's phone is our library (included) - its article:
https://www.theengineeringprojects.com/2026/10/mobile-wifi-monitor-library-for-proteus.html
Support us (the libraries are free):
https://www.theengineeringprojects.com/donate
FILE STRUCTURE
nRF52840-Dongle-TEP-v1.0/
|-- Proteus Library Files/
| |-- TEPDONGLE52.LIB 22.8 KB the nRF52840 Dongle, to LIBRARY
| |-- TEPLAPTOP.LIB 39.5 KB the laptop (demo), to LIBRARY
| |-- TEPMOBILE.LIB 13.1 KB the phone (demo), to LIBRARY
|-- Proteus Model Files/
| |-- TEPNET.DLL 2.96 MB the board + monitors + network, to MODELS
|-- Arduino Code/
| |-- Dongle_Busy_Light/Dongle_Busy_Light.ino 3.7 KB the demo sketch
| |-- TEP Boards for Proteus/hardware/ 1.27 MB the Arduino IDE add-on 1.83.0 (304 files)
|-- Proteus Simulation/
| |-- Dongle_Busy_Light.hex 28.7 KB the demo sketch (U1)
| |-- nRF52840-Dongle-BLE-Busy-Light.pdsprj 15.6 KB the demo: a Bluetooth LE busy light
| |-- TEPNET.DLL 2.96 MB copy of the model
|-- README.txt ~11.3 KB this file
Total: 7.32 MB (unzipped). The source code of the models is not included.
WHAT IS IT?
Proteus 8 has no nRF52840 processor model, so this is NOT a real nRF52840 chip. Our team has put a lot of effort into
building this board ourselves: it is Nordic Semiconductor's nRF52840 Dongle (PCA10059) - the small blue USB stick with
the nRF52840 SoC (an Arm Cortex-M4F with 1 MB of flash and 256 KB of RAM; Bluetooth LE, 802.15.4 for Thread and native
USB), its own USB-A plug, the PCB antenna, the green LED0, the RGB LED1, the user button SW1 and the RESET button -
drawn compact, and it runs YOUR Arduino sketch in Proteus:
* You write a normal sketch and compile it in the Arduino IDE with our board package "TEP Boards for Proteus" 1.83.0
(in Arduino Code - see INSTALLATION). The dongle has no pin header, so the part has no pins to wire: its sketch
uses the LEDs, SW1, Serial and Bluetooth LE.
* LED0 (green) and the RGB LED1 (LEDR, LEDG, LEDB) light when LOW, as on the real dongle; analogWrite dims them, so
the RGB LED mixes any colour. LED_BUILTIN is LED0. SW1 reads LOW while you hold it: click SW1 on the dongle in the
running simulation.
* Bluetooth LE works through ArduinoBLE: the dongle advertises as a peripheral with your services and
characteristics, and our Mobile WiFi Monitor's Bluetooth app is the central (it lists the dongle, connects, reads,
writes and gets the notifications).
TEP additions: the USB plug opens the serial monitor (the same window as our TEP Serial Monitor Advance).
Limits (say them before you start): one phone is the central; the dongle cannot be a central itself. The castellated
edge pads, 802.15.4 / Thread and USB device classes are drawn, not modelled. Your sketch gets 8 KB of RAM in the
simulation (the real one: 256 KB), about 256 KB of flash, and int is 16 bits in the simulation (use long for big
numbers). See MODEL SCOPE AND LIMITS
Modelled: LED0, the RGB LED1 (on / off and analogWrite), SW1 and RESET; Serial (the dongle's monitor on the USB);
millis, attachInterrupt on SW1; Bluetooth LE as a peripheral (ArduinoBLE) with the phone as the central.
Not modelled: the nRF52840 itself, the edge pads, the radio's range, 802.15.4 / Thread, USB device classes, the
bootloader, the dongle as a central. The simulation runs below real time.
ONE DEVICE (search "NRF52840" in Pick Devices):
NRF52840 DONGLE "nRF52840 Dongle" V1.0 (Microprocessor ICs > Bluetooth Boards), prefix U, model TEPNET.DLL.
Its TEP window has no Windows title bar: the serial monitor (the USB plug, 115200 baud: Monitor, Plotter and Board
tabs).
The same TEPNET.DLL also runs our other sketch boards and the phone; it replaces any older TEPNET.DLL (keep only this
newest one in MODELS).
TEST STATUS
V1.0: verified in Proteus 8.5 on 18 Nov 2026 with the demo project as shipped. What the Proteus run showed:
* nRF52840-Dongle-BLE-Busy-Light: "Advertising as "Dongle Busy Light"", ">> FREE" (LED1 green); the phone's Bluetooth
app, SCAN, connect: "Phone connected", LED0 lit, the phone shows the status, the seconds and the changes.
* SW1 clicked four times: ">> BUSY (the last status lasted 22 s)" (red), ">> AWAY" (yellow), ">> DO NOT DISTURB"
(purple), ">> OFF" (dark); the phone followed every change.
* about 33 s of simulation, no errors, with the phone and the monitor open.
INSTALLATION (about 3 minutes)
1. Close Proteus. Extract the WHOLE ZIP to a normal folder (e.g. Desktop).
2. Copy everything in "Proteus Library Files" to the LIBRARY folder of Proteus, for example:
C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY
(on some PCs: C:\ProgramData\Labcenter Electronics\Proteus 8 Professional\LIBRARY). TEPDONGLE52.LIB is the dongle;
TEPMOBILE.LIB and TEPLAPTOP.LIB are the phone and the laptop.
3. Copy TEPNET.DLL from "Proteus Model Files" to the MODELS folder (...\Proteus 8 Professional\MODELS) - replace an
older TEPNET.DLL (this one is the first that knows this dongle).
4. Delete TEPDONGLE52.IDX from the LIBRARY folder if it is there.
5. The Arduino IDE (only to compile your own sketches - the demo has its HEX file): copy the folder
"Arduino Code\TEP Boards for Proteus\hardware" into your sketchbook folder (normally Documents\Arduino), so that
Documents\Arduino\hardware\tep\avr\boards.txt exists (replace an older copy); restart the IDE. The Arduino AVR Boards
platform must be installed (it comes with IDE 1.8.x; in IDE 2.x install "Arduino AVR Boards" from the Boards
Manager once).
Tools > Board > TEP Boards for Proteus > Nordic nRF52840 Dongle (TEP Proteus). ArduinoBLE is in the board package.
6. Start Proteus. In Pick Devices (P) search "NRF52840".
RUN THE DEMO
Keep the .hex file and the DLL beside the project in "Proteus Simulation".
nRF52840-Dongle-BLE-Busy-Light.pdsprj - U1 the nRF52840 Dongle (Dongle_Busy_Light.hex) is a busy light for an office
door: the RGB LED1 shows the status and the green LED0 lights while a phone is connected; MOB1 = the phone (Mobile WiFi
Monitor), whose Bluetooth app connects to it.
Press Run. The monitor prints "Advertising as "Dongle Busy Light"" and ">> FREE" (LED1 green). On the phone open the
Bluetooth app, press SCAN and connect: LED0 lights and the phone shows the status, how long it has lasted and the
changes. Click SW1 on the dongle: BUSY (red), AWAY (yellow), DO NOT DISTURB (purple), OFF, then FREE again; each change
is printed with how long the last status lasted, and the phone gets a notification.
Closed a window? The USB plug opens the monitor, a click on the phone's screen the phone.
THE PINS (the dongle has no header: these are the core numbers of its LEDs and button; the real GPIO from Zephyr's
nrf52840dongle_nrf52840)
LED0 0 the green LED0, lit when LOW (the real P0.06); LED_BUILTIN, LED_GREEN
LEDR 1 the RGB LED1's red, lit when LOW (P0.08); LED_RED
LEDG 2 the RGB LED1's green, lit when LOW (P1.09)
LEDB 3 the RGB LED1's blue, lit when LOW (P0.12); LED_BLUE
SW1 4 the user button, LOW when pressed (P1.06, pinMode INPUT_PULLUP); BUTTON1, BTN_BUILTIN
RESET the side button SW2 (the real P0.18): a click restarts the sketch
LED_BUILTIN_ACTIVE / LED_BUILTIN_INACTIVE and BTN_BUILTIN_ACTIVE / BTN_BUILTIN_INACTIVE are defined. analogWrite works
on 0 .. 3. Serial is the USB: the dongle's built-in monitor. There is no Serial1, Wire, SPI or analogRead (no header).
PROPERTIES (double-click the part > Edit Properties)
PROGRAM the sketch's HEX (Arduino IDE: Sketch > Export Compiled Binary with Nordic nRF52840 Dongle (TEP Proteus))
MONITOR YES = the built-in serial monitor on Serial; BAUD its speed (115200, or AUTO)
AUTOOPEN YES = the monitor window opens at Run (the demo: YES)
TROUBLESHOOTING
* The phone's list is empty: call BLE.begin(), set a local name and BLE.advertise(); call BLE.poll() in loop().
* SW1 does nothing: use pinMode(SW1, INPUT_PULLUP) and act when digitalRead() is LOW.
* The LEDs look inverted: they light when the pin is LOW, as on the real dongle (analogWrite 0 = full on).
* A colour looks wrong: LED1 mixes LEDR, LEDG and LEDB - yellow is red + green, purple red + blue.
* An integer goes wrong above 32767: int is 16 bits in the simulation - use long.
BUG REPORTS AND FEATURE REQUESTS
Please post them in our forum with a screenshot and the Serial Monitor text:
https://www.theengineeringprojects.com/forum
LICENCES AND THIRD-PARTY NOTES
* The board model (TEPNET.DLL) and the symbols and artwork (TEPDONGLE52.LIB) are made by The Engineering Projects. The
source code of the models is not included.
* TEP Boards for Proteus (Arduino Code): its core, the variants and the EEPROM, SPI and Wire libraries are modified
copies of the Arduino AVR core 1.8.6 - GNU Lesser General Public License 2.1 (LGPL 2.1, the text:
LICENSE-LGPL-2.1.txt); its ArduinoBLE and the others and our core files are MIT (LICENSE-MIT.txt).
* Our ArduinoBLE has the calls of the library of that name; its code is ours.
* Proteus is a product of Labcenter Electronics and is not included. nRF52840 and Nordic Semiconductor are names of
Nordic Semiconductor ASA, Arduino of Arduino. The Bluetooth word mark belongs to Bluetooth SIG. This library is not
made or endorsed by them or by Labcenter.
REBUILDING THE FIRMWARE (OPTIONAL)
The HEX file is supplied. Install TEP Boards for Proteus (INSTALLATION step 5), open Arduino Code\Dongle_Busy_Light,
select Nordic nRF52840 Dongle (TEP Proteus) and use Sketch > Export Compiled Binary. For a real dongle use Nordic's
nRF Connect SDK (or Zephyr with the board nrf52840dongle/nrf52840) and its USB bootloader. Its pins work at 3.3 V.
MODEL SCOPE AND LIMITS
Modelled: LED0, the RGB LED1 (on / off and analogWrite), SW1 and RESET; Serial (the dongle's monitor on the USB);
millis, attachInterrupt on SW1; Bluetooth LE as a peripheral (ArduinoBLE) with the phone as the central.
Not modelled: the nRF52840 itself, the edge pads, the radio's range, 802.15.4 / Thread, USB device classes, the
bootloader, the dongle as a central. The simulation runs below real time.
VERSION
TEP nRF52840 Dongle library V1.0 (Nov 2026). Device NRF52840 DONGLE (TEPDONGLE52.LIB / TEPNET.DLL), TEP Boards for
Proteus 1.83.0 (adds this dongle: LED0, LEDR / LEDG / LEDB, SW1).
Demo sketch Dongle_Busy_Light V1.0. Demo parts: MOBILE WIFI MONITOR.Development1 release
-
V1.0nRF52840 Dongle Library for Proteus V1.0this page
V1.0 is the only release in the Download Center so far. When a newer version is published, it appears above with its own download page.
Installation10 steps
From the download to a working project, in order. The steps follow what the package contains.
You will need
- Proteus Design SuiteProteus 8 or newer (Labcenter), on Windows
- Arduino IDE1.8 or 2.x, with the board of the tutorial chosen under Tools → Board
- The compiler named in the tutorialto build the source files into firmware
- Any archive toolWindows, macOS and Linux extract ZIP files on their own
Steps
- 1
Extract the archive
Right-click b64619b1f1d74c048916123cffdbb70e.zip and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (nRF52840-Dongle-TEP-v1.0) as it is.
- 2
Copy the library files into Proteus
Move TEPDONGLE52.LIB, TEPLAPTOP.LIB and TEPMOBILE.LIB and the files into the LIBRARY folder of your Proteus installation: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY for Proteus 8, or the matching Proteus 7 folder. Older versions keep it under ProgramData\Labcenter Electronics. If Proteus is open, close it first.
- 3
Add the simulation model
Copy TEPNET.DLL into the MODELS folder next to LIBRARY, so the component can run, not only be drawn.
- 4
Restart Proteus and place the component
Start Proteus, open a schematic, press P (Pick Devices) and search for the component by the name used in the tutorial. It appears with its pins ready to wire.
- 5
Install the Arduino library
In the Arduino IDE choose Sketch → Include Library → Add .ZIP Library and pick the library, or copy its folder into Documents\Arduino\libraries. Restart the IDE to see its examples.
- 6
Open the sketch in the Arduino IDE
Open Dongle_Busy_Light.ino, eeprom_clear.ino and eeprom_crc.ino and 17 more, select your board and port under Tools, then Verify. Sketch → Export Compiled Binary writes the HEX file a simulation needs.
- 7
Build the source code
Open abi.cpp, Arduino.h and binary.h and 52 more in the compiler named in the tutorial (MikroC, Keil, MPLAB, Code Composer or the Arduino IDE) and build it to get the firmware.
- 8
Load the HEX file
In Proteus double-click the microcontroller, set Program File to Dongle_Busy_Light.hex and run the simulation. For real hardware, flash the same file with your programmer.
- 9
Open the example simulation
Open nRF52840-Dongle-BLE-Busy-Light.pdsprj in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
- 10
Follow the tutorial
nRF52840 Dongle Library for Proteus: Bluetooth LE USB Simulation explains every connection and setting in order; keep it open beside the files while you build.
FAQs9 questionsContact TEP
How do I download nRF52840 Dongle Library for Proteus V1.0?
Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.
What is inside the archive?
nRF52840 Dongle Library for Proteus V1.0 comes as a ZIP archive of 313 files (3.2 MB, 7.3 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, an Arduino sketch, an Arduino library, compiled HEX firmware and source code. Open the File Structure tab for the full list of 313 files.
What should I do if the download does not start?
Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.
Is this file free?
Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.
How do I check that the file arrived complete?
Compare its SHA-256 with the one on this page, ccf3b2d50fe8c817bf6ca1dbe8a1938bbea663f62d572c388b49002aaa63ca3c. In PowerShell run Get-FileHash "b64619b1f1d74c048916123cffdbb70e.zip"; on macOS or Linux run shasum -a 256 "b64619b1f1d74c048916123cffdbb70e.zip". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.
Do I need WinRAR to open the ZIP file?
No. Windows, macOS and Linux open ZIP archives on their own (Extract All, or double-click). WinRAR and 7-Zip work too. Extract the whole archive before using the files.
Where do I put the LIB and IDX files?
Both files go into the LIBRARY folder of your Proteus installation (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY; Proteus 7 has the same folder under its own name). Restart Proteus afterwards and search for the component with P.
Which Proteus version does the library need?
The tutorial names the Proteus version the library was made and tested with. Most TEP libraries work in Proteus 7 and Proteus 8; if the component does not appear after a restart, check that both the LIB and the IDX file were copied and that Proteus was fully closed while copying.
How do I get the HEX file into the simulation?
Compile the sketch in the Arduino IDE (Sketch → Export Compiled Binary gives you the HEX next to the sketch), then in Proteus double-click the board, set Program File to that HEX and run.
Members skip the wait. Log in or join TEP.
- 0Total downloads
- 4%Popularity
- ProteusCategory
- 0Comments
- ssyedzainnasirUploaded by
- 21 Nov 2026Uploaded at
ccf3b2d50fe8c817bf6ca1dbe8a1938bbea663f62d572c388b49002aaa63ca3c






















Comments
0