Project Files of nRF54H20 DK Library for Proteus: nRF54H20 Bluetooth LE Simulation
569f6933c4a24c46a53ea0fe5a938c63.zip

nRF54H20 DK Library for Proteus V1.0
nRF54H20 DK Library for Proteus V1.0 comes as a ZIP archive of 315 files (3.2 MB, 7.3 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, an Arduino sketch, an Arduino library, compiled HEX firmware and source code.
- LIBProteus library
- DLLProteus model
- DSNProteus simulation
- INOArduino sketch
- LIBArduino library
- HEXHEX firmware
- SRCSource code
Description
nRF54H20-DK-Library-for-Proteus-v1.0.zip with Nordic's nRF54H20 DK in Proteus (your sketch with LED1 .. LED4, BUTTON1 .. BUTTON4, Bluetooth LE to a phone and a serial monitor; TEPNRF54H20DK.LIB, TEPNET.DLL and the TEP Boards for Proteus add-on 1.85.0), the phone library, the quiz buzzer demo with its sketch and a README.
File Structure
4 KB1.1 KB7.7 KB11 KB8.5 KB1.5 KB1.7 KB1.9 KB5.7 KB4.9 KB1.1 KB5.8 KB9.6 KB7.2 KB2.5 KB2.1 KB1.9 KB2.1 KB4.4 KB1.1 KB3 KB3 KB1.8 KB2.5 KB3.5 KB149 B2.7 KB2 KB6.4 KB3.2 KB1.3 KB963 B8.6 KB5.9 KB6 KB12 KB1.6 KB1.3 KB14.7 KB4.3 KB6.1 KB20.1 KB8.2 KB2 KB4.5 KB311 B12.8 KB6.7 KB6.1 KB2.2 KB3.4 KB5.9 KB1.5 KB1.6 KB16.6 KB9.7 KB6.9 KB2.1 KB533 B5.7 KB7.4 KB514 B1.7 KB896 B481 B1.4 KB1012 B482 B936 B559 B467 B3.6 KB3.8 KB504 B956 B575 B455 B8.3 KB10.9 KB522 B79 B5.5 KB3.1 KB79 B442 B918 B1.4 KB1.8 KB1 KB1.3 KB1.4 KB1.8 KB1.4 KB5.7 KB502 B463 B5 KB6.5 KB3.4 KB3.4 KB500 B1.6 KB368 B406 B466 B404 B444 B460 B477 B739 B448 B1.3 KB350 B5.7 KB4 KB562 B1.5 KB2 KB550 B7.2 KB4.1 KB371 B4.5 KB3.5 KB492 B390 B478 B6.6 KB2.4 KB479 B5.1 KB1.9 KB1.3 KB1.3 KB750 B1.3 KB490 B2.2 KB1.9 KB498 B1.2 KB1.2 KB487 B5.1 KB4.6 KB371 B3.6 KB2.5 KB534 B1.5 KB1.2 KB478 B6.2 KB3 KB1.5 KB1.7 KB469 B1 KB1.7 KB433 B294 B358 B1.3 KB2.5 KB13.2 KB3.8 KB659 B510 B4.4 KB1.9 KB5.8 KB11 KB835 B518 B308 B1.3 KB3.3 KB568 B6.4 KB2.3 KB29 B436 B9.2 KB4.9 KB439 B4.2 KB1.5 KB9.3 KB7.1 KB4.7 KB2.4 KB388 B5.1 KB893 B667 B1.3 KB5.5 KB2.3 KB1.8 KB468 B882 B530 B791 B487 B894 B2 KB730 B646 B2.6 KB977 B702 B20.6 KB1.8 KB11.8 KB3.2 KB596 B406 B6.3 KB5.7 KB9.3 KB7.7 KB7.7 KB6.1 KB5.8 KB5.9 KB6.4 KB6.4 KB5.3 KB5.6 KB5.7 KB7.9 KB7.7 KB6.5 KB6.3 KB6.2 KB6.4 KB5.9 KB10.3 KB8.5 KB6.6 KB7.6 KB6.7 KB6.1 KB6.7 KB8.3 KB6.2 KB7.2 KB6.2 KB5.9 KB5.6 KB5.7 KB6.7 KB5.9 KB6.2 KB6 KB6 KB6.1 KB6.3 KB6 KB6.1 KB6.2 KB6 KB5.8 KB6.4 KB6.4 KB3.8 KB6.4 KB7.3 KB6.4 KB4 KB6.9 KB6 KB6.8 KB7 KB6.3 KB6.4 KB6.5 KB6.5 KB6.6 KB6.5 KB5.9 KB6.1 KB5.6 KB6.6 KB5.9 KB7.5 KB3.8 KB4.4 KB5.4 KB7.7 KB7.1 KB5.8 KB5.9 KB5.9 KB6.9 KB5.7 KB5.9 KB5.8 KB5.5 KB5.5 KB7.1 KB5.2 KB41.8 KB25.9 KB1.3 KB8.5 KB37.5 KB39.5 KB13.1 KB34.7 KB3.0 MB30.6 KB17.1 KB3.0 MB10.8 KBGallery12 images from the tutorialOpen the tutorial
The circuit, the board and the results as they appear in nRF54H20 DK Library for Proteus: nRF54H20 Bluetooth LE Simulation. Open an image for its full size.












README
NRF54H20 DK LIBRARY FOR PROTEUS - V1.0 (YOUR ARDUINO SKETCH, BLUETOOTH LE TO A PHONE, FOUR LEDS AND FOUR BUTTONS)
Designed by The Engineering Projects
www.TheEngineeringProjects.com
IMPORTANT LINKS
Article (read it first - pictures, step by step, every feature explained):
https://www.theengineeringprojects.com/2026/11/nrf54h20-dk-library-for-proteus.html
Report a bug or suggest a feature (our forum):
https://www.theengineeringprojects.com/forum
The demo's phone is our library (included) - its article:
https://www.theengineeringprojects.com/2026/10/mobile-wifi-monitor-library-for-proteus.html
Support us (the libraries are free):
https://www.theengineeringprojects.com/donate
FILE STRUCTURE
nRF54H20-DK-TEP-v1.0/
|-- Proteus Library Files/
| |-- TEPLAPTOP.LIB 39.5 KB the laptop (demo), to LIBRARY
| |-- TEPMOBILE.LIB 13.1 KB the phone (demo), to LIBRARY
| |-- TEPNRF54H20DK.LIB 34.7 KB the nRF54H20 DK, to LIBRARY
|-- Proteus Model Files/
| |-- TEPNET.DLL 2.96 MB the board + monitors + network, to MODELS
|-- Arduino Code/
| |-- DK54H_Quiz_Buzzer/DK54H_Quiz_Buzzer.ino 4.0 KB the demo sketch
| |-- TEP Boards for Proteus/hardware/ 1.28 MB the Arduino IDE add-on 1.85.0 (306 files)
|-- Proteus Simulation/
| |-- DK54H_Quiz_Buzzer.hex 30.6 KB the demo sketch (U1)
| |-- nRF54H20-DK-BLE-Quiz-Buzzer.pdsprj 17.1 KB the demo: a Bluetooth LE quiz buzzer
| |-- TEPNET.DLL 2.96 MB copy of the model
|-- README.txt ~11.0 KB this file
Total: 7.35 MB (unzipped). The source code of the models is not included.
WHAT IS IT?
Proteus 8 has no nRF54H20 processor model, so this is NOT a real nRF54H20 chip. Our team has put a lot of effort into
building this board ourselves: it is Nordic Semiconductor's nRF54H20 DK - the blue development kit for the nRF54H20,
Nordic's multicore SoC (an Arm Cortex-M33 application core up to 320 MHz, a Cortex-M33 radio core up to 256 MHz and
RISC-V peripheral processors; Bluetooth LE and 802.15.4), with its PCB antenna, the external octal flash, the interface
MCU with its USB port, the power switch, the four buttons and the four green LEDs - drawn compact, and it runs YOUR
Arduino sketch in Proteus:
* You write a normal sketch and compile it in the Arduino IDE with our board package "TEP Boards for Proteus" 1.85.0
(in Arduino Code - see INSTALLATION). Zephyr's board files for the kit define no Arduino header, so the port
headers are drawn, not pins of the part: the sketch uses the LEDs, the buttons, Serial and Bluetooth LE.
* LED1 .. LED4 are lit when HIGH, as on the real kit (LED_BUILTIN is LED1). BUTTON1 .. BUTTON4 read LOW while you
hold them: click a button on the board in the running simulation.
* Bluetooth LE works through ArduinoBLE: the board advertises as a peripheral with your services and
characteristics, and our Mobile WiFi Monitor's Bluetooth app is the central (it lists the board, connects, reads,
writes and gets the notifications).
TEP additions: the USB port opens the serial monitor (the same window as our TEP Serial Monitor Advance).
Limits (say them before you start): one phone is the central; the board cannot be a central itself. The port headers,
the extra cores, 802.15.4 / Thread, the external flash and USB device classes are drawn, not modelled. Your sketch gets
8 KB of RAM in the simulation, about 256 KB of flash, and int is 16 bits in the simulation (use long for big numbers).
See MODEL SCOPE AND LIMITS
Modelled: the four LEDs (on / off and analogWrite), the four buttons and RESET; Serial (the board's monitor on the
USB); millis, attachInterrupt on the buttons; Bluetooth LE as a peripheral (ArduinoBLE) with the phone as the central.
Not modelled: the nRF54H20 itself, its radio and peripheral cores, the port headers, the radio's range, 802.15.4 /
Thread, the external flash, USB device classes, the board as a central. The simulation runs below real time.
ONE DEVICE (search "NRF54H20" in Pick Devices):
NRF54H20 DK "nRF54H20 DK" V1.0 (Microprocessor ICs > Bluetooth Boards), prefix U, model TEPNET.DLL.
Its TEP window has no Windows title bar: the serial monitor (the USB port, 115200 baud: Monitor, Plotter and Board
tabs).
The same TEPNET.DLL also runs our other sketch boards and the phone; it replaces any older TEPNET.DLL (keep only this
newest one in MODELS).
TEST STATUS
V1.0: verified in Proteus 8.5 on 18 Nov 2026 with the demo project as shipped. What the Proteus run showed:
* nRF54H20-DK-BLE-Quiz-Buzzer: the lamp test (four LEDs), "Advertising as "nRF54H20 Quiz"", ">> ROUND 1"; the phone's
Bluetooth app, SCAN, connect: "Phone connected", the round, the winner and the scores on the phone.
* BUTTON3 ">> PLAYER 3 first in round 1 scores 0 0 1 0" (LED3); BUTTON1 while the round was locked counted nothing;
3 s later ">> ROUND 2", BUTTON1 "PLAYER 1 first", round 3 PLAYER 3, round 4 PLAYER 4: "scores 1 0 2 1".
* about 87 s of simulation, no errors, with the phone and the monitor open.
INSTALLATION (about 3 minutes)
1. Close Proteus. Extract the WHOLE ZIP to a normal folder (e.g. Desktop).
2. Copy everything in "Proteus Library Files" to the LIBRARY folder of Proteus, for example:
C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY
(on some PCs: C:\ProgramData\Labcenter Electronics\Proteus 8 Professional\LIBRARY). TEPNRF54H20DK.LIB is the board;
TEPMOBILE.LIB and TEPLAPTOP.LIB are the phone and the laptop.
3. Copy TEPNET.DLL from "Proteus Model Files" to the MODELS folder (...\Proteus 8 Professional\MODELS) - replace an
older TEPNET.DLL (this one is the first that knows this board).
4. Delete TEPNRF54H20DK.IDX from the LIBRARY folder if it is there.
5. The Arduino IDE (only to compile your own sketches - the demo has its HEX file): copy the folder
"Arduino Code\TEP Boards for Proteus\hardware" into your sketchbook folder (normally Documents\Arduino), so that
Documents\Arduino\hardware\tep\avr\boards.txt exists (replace an older copy); restart the IDE. The Arduino AVR Boards
platform must be installed (it comes with IDE 1.8.x; in IDE 2.x install "Arduino AVR Boards" from the Boards
Manager once).
Tools > Board > TEP Boards for Proteus > Nordic nRF54H20 DK (TEP Proteus). ArduinoBLE is in the board package.
6. Start Proteus. In Pick Devices (P) search "NRF54H20".
RUN THE DEMO
Keep the .hex file and the DLL beside the project in "Proteus Simulation".
nRF54H20-DK-BLE-Quiz-Buzzer.pdsprj - U1 the nRF54H20 DK (DK54H_Quiz_Buzzer.hex) is a quiz buzzer for four players, one
button each; MOB1 = the phone (Mobile WiFi Monitor), the quiz master's, whose Bluetooth app connects to it.
Press Run. The four LEDs flash once (a lamp test) and the monitor prints "Advertising as "nRF54H20 Quiz"" and ">> ROUND
1". On the phone open the Bluetooth app, press SCAN and connect: it shows the round, the winner and the scores. Click a
button: the first press wins the round, that player's LED lights and the other buttons are locked; after 3 s the
round ends and the next one opens.
Closed a window? The USB port opens the monitor, a click on the phone's screen the phone.
THE PINS (the kit has no modelled header: these are the core numbers of its LEDs and buttons; the real GPIO from
Zephyr's nrf54h20dk/nrf54h20/cpuapp)
LED1 .. LED4 0 .. 3 the green LEDs, lit when HIGH (the real P9.00 .. P9.03); LED_BUILTIN is LED1
BUTTON1 .. BUTTON4 4 .. 7 the buttons, LOW when pressed (the real P0.08 .. P0.11, pinMode INPUT_PULLUP)
RESET the RESET button: a click restarts the sketch
LED_BUILTIN_ACTIVE / LED_BUILTIN_INACTIVE and BTN_BUILTIN (BUTTON1) are defined. analogWrite works on the LEDs. Serial
is the USB: the board's built-in monitor. There is no Serial1, Wire, SPI or analogRead (no modelled header).
PROPERTIES (double-click the part > Edit Properties)
PROGRAM the sketch's HEX (Arduino IDE: Sketch > Export Compiled Binary, board Nordic nRF54H20 DK)
MONITOR YES = the built-in serial monitor on Serial; BAUD its speed (115200, or AUTO)
AUTOOPEN YES = the monitor window opens at Run (the demo: YES)
TROUBLESHOOTING
* The phone's list is empty: call BLE.begin(), set a local name and BLE.advertise(); call BLE.poll() in loop().
* A button does nothing: use pinMode(BUTTONx, INPUT_PULLUP) and act when digitalRead() is LOW.
* An LED stays dark: the nRF54H20 DK's LEDs light when the pin is HIGH (not LOW as on the nRF52 kits).
* An integer goes wrong above 32767: int is 16 bits in the simulation - use long.
BUG REPORTS AND FEATURE REQUESTS
Please post them in our forum with a screenshot and the Serial Monitor text:
https://www.theengineeringprojects.com/forum
LICENCES AND THIRD-PARTY NOTES
* The board model (TEPNET.DLL) and the symbols and artwork (TEPNRF54H20DK.LIB) are made by The Engineering Projects.
The source code of the models is not included.
* TEP Boards for Proteus (Arduino Code): its core, the variants and the EEPROM, SPI and Wire libraries are modified
copies of the Arduino AVR core 1.8.6 - GNU Lesser General Public License 2.1 (LGPL 2.1, the text:
LICENSE-LGPL-2.1.txt); its ArduinoBLE and the others and our core files are MIT (LICENSE-MIT.txt).
* Our ArduinoBLE has the calls of the library of that name; its code is ours.
* Proteus is a product of Labcenter Electronics and is not included. nRF54H20 and Nordic Semiconductor are names of
Nordic Semiconductor ASA, Arduino of Arduino. The Bluetooth word mark belongs to Bluetooth SIG. This library is not
made or endorsed by them or by Labcenter.
REBUILDING THE FIRMWARE (OPTIONAL)
The HEX file is supplied. Install TEP Boards for Proteus (INSTALLATION step 5), open Arduino Code\DK54H_Quiz_Buzzer,
select Nordic nRF54H20 DK (TEP Proteus) and use Sketch > Export Compiled Binary. For a real kit use Nordic's nRF
Connect SDK (Zephyr with the board nrf54h20dk/nrf54h20/cpuapp).
MODEL SCOPE AND LIMITS
Modelled: the four LEDs (on / off and analogWrite), the four buttons and RESET; Serial (the board's monitor on the
USB); millis, attachInterrupt on the buttons; Bluetooth LE as a peripheral (ArduinoBLE) with the phone as the central.
Not modelled: the nRF54H20 itself, its radio and peripheral cores, the port headers, the radio's range, 802.15.4 /
Thread, the external flash, USB device classes, the board as a central. The simulation runs below real time.
VERSION
TEP nRF54H20 DK library V1.0 (Nov 2026). Device NRF54H20 DK (TEPNRF54H20DK.LIB / TEPNET.DLL), TEP Boards for Proteus
1.85.0 (adds this board: LED1 .. LED4, BUTTON1 .. BUTTON4).
Demo sketch DK54H_Quiz_Buzzer V1.0. Demo parts: MOBILE WIFI MONITOR.Development1 release
-
V1.0nRF54H20 DK Library for Proteus V1.0this page
V1.0 is the only release in the Download Center so far. When a newer version is published, it appears above with its own download page.
Installation10 steps
From the download to a working project, in order. The steps follow what the package contains.
You will need
- Proteus Design SuiteProteus 8 or newer (Labcenter), on Windows
- Arduino IDE1.8 or 2.x, with the board of the tutorial chosen under Tools → Board
- The compiler named in the tutorialto build the source files into firmware
- Any archive toolWindows, macOS and Linux extract ZIP files on their own
Steps
- 1
Extract the archive
Right-click 569f6933c4a24c46a53ea0fe5a938c63.zip and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (nRF54H20-DK-TEP-v1.0) as it is.
- 2
Copy the library files into Proteus
Move TEPLAPTOP.LIB, TEPMOBILE.LIB and TEPNRF54H20DK.LIB and the files into the LIBRARY folder of your Proteus installation: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY for Proteus 8, or the matching Proteus 7 folder. Older versions keep it under ProgramData\Labcenter Electronics. If Proteus is open, close it first.
- 3
Add the simulation model
Copy TEPNET.DLL into the MODELS folder next to LIBRARY, so the component can run, not only be drawn.
- 4
Restart Proteus and place the component
Start Proteus, open a schematic, press P (Pick Devices) and search for the component by the name used in the tutorial. It appears with its pins ready to wire.
- 5
Install the Arduino library
In the Arduino IDE choose Sketch → Include Library → Add .ZIP Library and pick the library, or copy its folder into Documents\Arduino\libraries. Restart the IDE to see its examples.
- 6
Open the sketch in the Arduino IDE
Open DK54H_Quiz_Buzzer.ino, eeprom_clear.ino and eeprom_crc.ino and 17 more, select your board and port under Tools, then Verify. Sketch → Export Compiled Binary writes the HEX file a simulation needs.
- 7
Build the source code
Open abi.cpp, Arduino.h and binary.h and 52 more in the compiler named in the tutorial (MikroC, Keil, MPLAB, Code Composer or the Arduino IDE) and build it to get the firmware.
- 8
Load the HEX file
In Proteus double-click the microcontroller, set Program File to DK54H_Quiz_Buzzer.hex and run the simulation. For real hardware, flash the same file with your programmer.
- 9
Open the example simulation
Open nRF54H20-DK-BLE-Quiz-Buzzer.pdsprj in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
- 10
Follow the tutorial
nRF54H20 DK Library for Proteus: nRF54H20 Bluetooth LE Simulation explains every connection and setting in order; keep it open beside the files while you build.
FAQs9 questionsContact TEP
How do I download nRF54H20 DK Library for Proteus V1.0?
Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.
What is inside the archive?
nRF54H20 DK Library for Proteus V1.0 comes as a ZIP archive of 315 files (3.2 MB, 7.3 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, an Arduino sketch, an Arduino library, compiled HEX firmware and source code. Open the File Structure tab for the full list of 315 files.
What should I do if the download does not start?
Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.
Is this file free?
Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.
How do I check that the file arrived complete?
Compare its SHA-256 with the one on this page, bb6ed28900bdeb11689c5b758c31983722474395de0446f58e4df24e58ccda5d. In PowerShell run Get-FileHash "569f6933c4a24c46a53ea0fe5a938c63.zip"; on macOS or Linux run shasum -a 256 "569f6933c4a24c46a53ea0fe5a938c63.zip". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.
Do I need WinRAR to open the ZIP file?
No. Windows, macOS and Linux open ZIP archives on their own (Extract All, or double-click). WinRAR and 7-Zip work too. Extract the whole archive before using the files.
Where do I put the LIB and IDX files?
Both files go into the LIBRARY folder of your Proteus installation (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY; Proteus 7 has the same folder under its own name). Restart Proteus afterwards and search for the component with P.
Which Proteus version does the library need?
The tutorial names the Proteus version the library was made and tested with. Most TEP libraries work in Proteus 7 and Proteus 8; if the component does not appear after a restart, check that both the LIB and the IDX file were copied and that Proteus was fully closed while copying.
How do I get the HEX file into the simulation?
Compile the sketch in the Arduino IDE (Sketch → Export Compiled Binary gives you the HEX next to the sketch), then in Proteus double-click the board, set Program File to that HEX and run.
Members skip the wait. Log in or join TEP.
- 0Total downloads
- 4%Popularity
- ProteusCategory
- 0Comments
- ssyedzainnasirUploaded by
- 21 Nov 2026Uploaded at
bb6ed28900bdeb11689c5b758c31983722474395de0446f58e4df24e58ccda5d






















Comments
0