Project Files of Raspberry Pi 5 Pill Dispenser with A4988 Stepper (Proteus Simulation)
d39aefa0f5e74c5b860e311a2341c682.zip

Raspberry Pi 5 Pill Dispenser with A4988 Stepper in Proteus Simulation V1.0
Raspberry Pi 5 Pill Dispenser with A4988 Stepper in Proteus Simulation V1.0 comes as a ZIP archive of 144 files (14.2 MB, 27.9 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, source code and a nested archive.
- LIBProteus library
- DLLProteus model
- DSNProteus simulation
- SRCSource code
- ZIPNested archive
Description
Raspberry-Pi-5-Pill-Dispenser-A4988-Stepper-Proteus-Simulation-v1.0.zip: the complete Proteus simulation project (Raspberry Pi 5, the A4988 and the NEMA 17, a 7-segment digit, SMD resistors, a push button, an active buzzer, the Laptop and Mobile WiFi Monitors), the Python program pill_dispenser.py, every LIB and DLL the simulation needs, the TEPPi Python runtime and a README.
File Structure
20.7 KB9.9 KB39.5 KB13.1 KB60.5 KB28.8 KB171.9 KB158.5 KB3.3 MB34.3 KB620.8 KB36 KB169.8 KB628.1 KB99.3 KB65.3 KB4.8 MB4.1 MB80 B97.8 KB26.8 KB1.2 MB1.1 MB88.9 KB27.3 KB55.8 KB79.8 KB105.8 KB193.8 KB113.8 KB48.8 KB145.8 KB36.8 KB29.3 KB42.3 KB28.8 KB67.3 KB89.3 KB153.8 KB22.8 KB38.8 KB2.1 KB9.9 KB4.1 KB1.3 KB4.7 KB431 B2.5 KB17.5 KB283 B6.5 KB37.9 KB11.1 KB5.5 KB885 B13.6 KB9 KB878 B1.5 KB4 KB1004 B10 B110 B2.6 KB1.1 KB8.9 KB58.5 KB12.4 KB6.6 KB18.5 KB20.7 KB27.8 KB21.1 KB7.1 KB7.7 KB2.7 KB51.2 KB100.9 KB1.2 KB24.3 KB7.4 KB53.6 KB26.1 KB20.5 KB60.5 KB19.6 KB1.6 KB8.4 KB20.9 KB2.6 KB539 B1.4 KB9.7 KB2.8 KB21 B92 B7.9 KB264 B3.4 KB3.8 KB17.5 KB55.2 KB3.3 KB10.8 KB1.5 KB4.2 KB7.3 KB2.5 KB32.6 KB14.5 KB283 B17.4 KB257 B691 B14.5 KB12.8 KB3.6 KB1.7 KB37 KB418 B6.2 KB7 KB37.3 KB10.6 KB23.7 KB28.7 KB8.8 KB16.9 KB274 KB276 KB2.9 MB291.5 KB305.5 KB308.5 KB38.5 KB10.3 KB274 KB276 KB2.9 MB291.5 KB305.5 KB308.5 KB10.3 KB10.2 KBGallery12 images from the tutorialOpen the tutorial
The circuit, the board and the results as they appear in Raspberry Pi 5 Pill Dispenser with A4988 Stepper (Proteus Simulation). Open an image for its full size.












README
===============================================================================================================
Raspberry Pi 5 Pill Dispenser with A4988 Stepper (Proteus Simulation) - Project V1.0
The Engineering Projects - www.TheEngineeringProjects.com
===============================================================================================================
IMPORTANT LINKS
The project tutorial (circuit, code, simulation results):
https://www.theengineeringprojects.com/2026/11/raspberry-pi-5-pill-dispenser-a4988-stepper-proteus-simulation.html
The libraries this project is built from (each post has its own full download and tutorial):
Raspberry Pi 5 board:
https://www.theengineeringprojects.com/2026/10/raspberry-pi-5-library-for-proteus.html
A4988 / DRV8825 stepper driver and the NEMA 17 motor:
https://www.theengineeringprojects.com/2026/10/a4988-drv8825-stepper-driver-library-for-proteus-v1-0.html
7-segment display:
https://www.theengineeringprojects.com/2026/11/7-segment-display-library-for-proteus.html
SMD resistor:
https://www.theengineeringprojects.com/2026/11/smd-resistor-library-for-proteus.html
Push button:
https://www.theengineeringprojects.com/2026/11/push-button-library-for-proteus.html
Active buzzer:
https://www.theengineeringprojects.com/2026/11/active-buzzer-library-for-proteus.html
Laptop WiFi Monitor:
https://www.theengineeringprojects.com/2026/10/laptop-wifi-monitor-library-for-proteus.html
Mobile WiFi Monitor:
https://www.theengineeringprojects.com/2026/10/mobile-wifi-monitor-library-for-proteus.html
Support our free work: https://www.theengineeringprojects.com/donate
FILE STRUCTURE
Pi-5-Pill-Dispenser-TEP-v1.0/
|-- Proteus Library Files/
| |-- TEPBUTTON.LIB 20.7 KB a part of the project -> LIBRARY folder
| |-- TEPBUZZER.LIB 9.9 KB a part of the project -> LIBRARY folder
| |-- TEPLAPTOP.LIB 39.5 KB a part of the project -> LIBRARY folder
| |-- TEPMOBILE.LIB 13.1 KB a part of the project -> LIBRARY folder
| |-- TEPRPI5.LIB 60.5 KB a part of the project -> LIBRARY folder
| |-- TEPSEVENSEG.LIB 28.8 KB a part of the project -> LIBRARY folder
| |-- TEPSMDRES.LIB 171.9 KB a part of the project -> LIBRARY folder
| |-- TEPSTEPPER.LIB 158.5 KB a part of the project -> LIBRARY folder
|-- Proteus Model Files/
| |-- TEPBUTTON.DLL 274.0 KB a model -> MODELS folder
| |-- TEPBUZZER.DLL 276.0 KB a model -> MODELS folder
| |-- TEPNET.DLL 2.90 MB a model -> MODELS folder
| |-- TEPSEVENSEG.DLL 291.5 KB a model -> MODELS folder
| |-- TEPSMDRES.DLL 305.5 KB a model -> MODELS folder
| |-- TEPSTEPPER.DLL 308.5 KB a model -> MODELS folder
| |-- TEPPi/python/ 17.54 MB Python 3.11 embeddable -> MODELS\TEPPi (33 files)
| |-- TEPPi/runtime/ 1.11 MB TEP Pi runtime, gpiozero -> MODELS\TEPPi (87 files)
|-- Proteus Simulation/
| |-- Pi-5-Pill-Dispenser.pdsprj 38.5 KB the project simulation
| |-- pill_dispenser.py 10.3 KB the program PI1 runs
| |-- TEPBUTTON.DLL 274.0 KB copy of the model
| |-- TEPBUZZER.DLL 276.0 KB copy of the model
| |-- TEPNET.DLL 2.90 MB copy of the model
| |-- TEPSEVENSEG.DLL 291.5 KB copy of the model
| |-- TEPSMDRES.DLL 305.5 KB copy of the model
| |-- TEPSTEPPER.DLL 308.5 KB copy of the model
|-- Python Code/
| |-- pill_dispenser.py 10.3 KB the program (the same file)
|-- README.txt ~9.9 KB this file
Total: 27.85 MB (unzipped). The C++ source code of the models is not included.
WHAT IS IT?
A pill dispenser you can run in Proteus: a Raspberry Pi 5 turns an 8-compartment carousel with a NEMA 17 stepper at
each dose time, shows the dose on a 7-segment digit, beeps until the TAKEN button is pressed, reports a missed dose
and serves a web dashboard for a carer.
* U1 an A4988 stepper driver (A4988ADVTEP): STEP GPIO20 (pin 38), DIR GPIO21 (pin 40), EN GPIO16 (pin 36, low =
on); MS1 and MS2 on 3V3, MS3 on GND = 1/8 step; RST, SLP and VDD on 3V3; VMOT on +12V.
* M1 a NEMA 17 stepper with a dial (NEMA17TEP), 1.8 deg: 1600 microsteps a turn, 200 = one compartment (45 deg).
* DS1 a 7-segment digit (SEVENSEG1TEP, common cathode, red): A - G from GPIO5, 6, 13, 19, 26, 12 and 4 through R1 -
R7, 220 ohm SMD resistors (RESISTORSMD1206TEP); COM to GND.
* SW1 the TAKEN button (BUTTONGREENTEP) from 3V3 to GPIO17 (pin 11), R8 (10 kohm SMD) to GND.
* BZ1 an active buzzer (BUZZERACTIVETEP) on GPIO22 (pin 15).
* RASPBERRY PI 5 (PI1) runs pill_dispenser.py on Ethernet at 192.168.1.51 (port 8000).
* Laptop WiFi Monitor (PC1) and Mobile WiFi Monitor (MOB1) open http://192.168.1.51:8000/.
The rules (at the top of the program):
* doses at 08:00, 14:00 and 20:00; at a dose the carousel turns one compartment to the outlet, the digit shows the
dose number and the buzzer beeps until TAKEN;
* 30 minutes without TAKEN: MISSED - E on the digit, a long beep, the dashboard; a later TAKEN counts as late;
* the A4988 is enabled only while the carousel turns (no holding current between doses);
* the day clock runs CLOCK = 720 times faster in the simulation (12 minutes a second, from 07:00); 1 for real.
Its pages:
/ the dashboard: the time, the dose waiting, the carousel, the doses of the day, the events
/silence stop the beeping (the dose still waits) /refill back to the empty compartment /data JSON
No extra Python library: lgpio (in the TEPPi runtime and on Raspberry Pi OS), threading, http.server.
TEST STATUS
Tested in Proteus 8 Professional on Windows 11, the run that made the tutorial's screenshots (the day clock's times):
- 07:00 "ready: compartment 0 at the outlet (empty), 7 doses loaded"; the digit shows -.
- 08:03 dose 1: the carousel turned one compartment (the A4988: 200 microsteps at 1/8 step, then EN high again);
the digit 1, the reminder beeping; 08:28 "dose 1 TAKEN after 28 min" (the button bounced 11 edges in 5.2 ms).
- 14:03 dose 2; 14:25 SILENCE from the phone (the beeping stops, the dose still waits); 14:30 "dose 2 MISSED: not
taken in 30 minutes - tell the carer", E on the digit and a 0.6 s beep; 15:29 "dose 2 TAKEN late, after 89 min".
- 15:55 REFILL from the laptop: back 2 compartments (400 microsteps, DIR low) to the empty one, 7 doses loaded.
- 20:03 dose 3; 20:25 "dose 3 TAKEN after 25 min". The A4988's count at the end: 200 microsteps, exactly one
compartment from home - not a step lost in five moves.
- 72.2 s of simulation in 321 s.
INSTALLATION
1. Close Proteus. Extract the WHOLE zip file, for example to your Desktop.
2. Copy the files from "Proteus Library Files" into the LIBRARY folder of Proteus, for example
C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY
3. Copy everything in "Proteus Model Files" - the DLL files and the TEPPi folder - into the MODELS folder (next
to LIBRARY).
4. Start Proteus. Press P in the schematic and search for RASPBERRY PI 5, A4988ADVTEP or SEVENSEG1TEP to check
that the parts are there.
RUN THE SIMULATION
1. Open "Proteus Simulation\Pi-5-Pill-Dispenser.pdsprj". Keep pill_dispenser.py and the DLL files beside it.
2. Press Play. The day starts at 07:00; at 08:00 the carousel turns, the digit shows 1 and the buzzer beeps.
3. Press the TAKEN button (its pop-up's Press, or the cap) within 30 minutes of the day; or wait and see MISSED.
4. Open the Laptop WiFi Monitor (PC1) or the Mobile WiFi Monitor (MOB1) and press Go: SILENCE and REFILL.
Your own program: edit pill_dispenser.py.
PROPERTIES USED IN THIS PROJECT
PI1 RASPBERRY PI 5 PROGRAM=pill_dispenser.py, ETHERNET=IN (192.168.1.51)
U1 A4988ADVTEP VREF=0.54 (0.99 A a coil); M1 NEMA17TEP LOAD=0
DS1 SEVENSEG1TEP COMMON=CATHODE, COLOUR=RED
R1 - R7 RESISTORSMD1206TEP 220 ohm; R8 10 kohm; SW1 BUTTONGREENTEP; BZ1 BUZZERACTIVETEP
PC1, MOB1 HOMEPAGE=http://192.168.1.51:8000/
TROUBLESHOOTING
* The carousel does not turn: EN must go low (GPIO16), VMOT needs +12V, and SLP / RST must be high.
* It turns too far or too little: check MS1 / MS2 / MS3 (1/8 step = 200 microsteps a compartment).
* A wrong digit: check the order of the segment pins A - G and COMMON=CATHODE.
* TAKEN is not seen: the button goes to 3V3 and R8 pulls GPIO17 down.
* The terminal cannot start Python: the TEPPi folder is not in MODELS.
LICENCES
* The project, the program, the parts (LIB files) and the models (DLL files) are made by The Engineering Projects
and are free for learning and for your own projects. The models use only standard Windows libraries.
The C++ source code of the models is not included; the source code is not included for any model.
* TEPPi\python is the Python 3.11 Windows embeddable package (Python Software Foundation License); TEPPi\runtime
holds our TEP Pi runtime with gpiozero and colorzero (BSD licences) - their licence files are inside the folders.
* Proteus is a product of Labcenter Electronics and is not included. Raspberry Pi is a trademark of Raspberry Pi
Ltd. This project is not made or endorsed by them or by the maker of the A4988. It is not a medical device.
VERSION
V1.0 - the first release of the project.
===============================================================================================================Development1 release
-
V1.0Raspberry Pi 5 Pill Dispenser with A4988 Stepper in Proteus Simulation V1.0this page
V1.0 is the only release in the Download Center so far. When a newer version is published, it appears above with its own download page.
Installation7 steps
From the download to a working project, in order. The steps follow what the package contains.
You will need
- Proteus Design SuiteProteus 8 or newer (Labcenter), on Windows
- Pythonto build the source files into firmware
- Any archive toolWindows, macOS and Linux extract ZIP files on their own
Steps
- 1
Extract the archive
Right-click d39aefa0f5e74c5b860e311a2341c682.zip and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (Pi-5-Pill-Dispenser-TEP-v1.0) as it is.
- 2
Copy the library files into Proteus
Move TEPBUTTON.LIB, TEPBUZZER.LIB and TEPLAPTOP.LIB and 5 more and the files into the LIBRARY folder of your Proteus installation: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY for Proteus 8, or the matching Proteus 7 folder. Older versions keep it under ProgramData\Labcenter Electronics. If Proteus is open, close it first.
- 3
Add the simulation model
Copy TEPBUTTON.DLL, TEPBUZZER.DLL and TEPNET.DLL and 10 more into the MODELS folder next to LIBRARY, so the component can run, not only be drawn.
- 4
Restart Proteus and place the component
Start Proteus, open a schematic, press P (Pick Devices) and search for the component by the name used in the tutorial. It appears with its pins ready to wire.
- 5
Build the source code
Open pill_dispenser.py, attr.py and color.py and 28 more in the compiler named in the tutorial (MikroC, Keil, MPLAB, Code Composer or the Arduino IDE) and build it to get the firmware.
- 6
Open the example simulation
Open Pi-5-Pill-Dispenser.pdsprj in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.
- 7
Follow the tutorial
Raspberry Pi 5 Pill Dispenser with A4988 Stepper (Proteus Simulation) explains every connection and setting in order; keep it open beside the files while you build.
FAQs8 questionsContact TEP
How do I download Raspberry Pi 5 Pill Dispenser with A4988 Stepper in Proteus Simulation V1.0?
Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.
What is inside the archive?
Raspberry Pi 5 Pill Dispenser with A4988 Stepper in Proteus Simulation V1.0 comes as a ZIP archive of 144 files (14.2 MB, 27.9 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, source code and a nested archive. Open the File Structure tab for the full list of 144 files.
What should I do if the download does not start?
Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.
Is this file free?
Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.
How do I check that the file arrived complete?
Compare its SHA-256 with the one on this page, 3c73fdee0617abf5bc967c82e6ecc34b3c73d738687b42ba22fa1cca1ecf3aba. In PowerShell run Get-FileHash "d39aefa0f5e74c5b860e311a2341c682.zip"; on macOS or Linux run shasum -a 256 "d39aefa0f5e74c5b860e311a2341c682.zip". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.
Do I need WinRAR to open the ZIP file?
No. Windows, macOS and Linux open ZIP archives on their own (Extract All, or double-click). WinRAR and 7-Zip work too. Extract the whole archive before using the files.
Where do I put the LIB and IDX files?
Both files go into the LIBRARY folder of your Proteus installation (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY; Proteus 7 has the same folder under its own name). Restart Proteus afterwards and search for the component with P.
Which Proteus version does the library need?
The tutorial names the Proteus version the library was made and tested with. Most TEP libraries work in Proteus 7 and Proteus 8; if the component does not appear after a restart, check that both the LIB and the IDX file were copied and that Proteus was fully closed while copying.
Members skip the wait. Log in or join TEP.
- 0Total downloads
- 4%Popularity
- Raspberry PiCategory
- 0Comments
- ssyedzainnasirUploaded by
- 18 Nov 2026Uploaded at
3c73fdee0617abf5bc967c82e6ecc34b3c73d738687b42ba22fa1cca1ecf3aba






















Comments
0