TEP DOWNLOAD CENTER

Project Files of Raspberry Pi 5 Pedestrian Crossing Traffic Light (Proteus Simulation)

Libraries Code Projects Simulation
tep://download-terminal 13b9f30131b94d5086f6962342ebdb68.zip ZIP archiveV1.0Verified0 downloadsFree
Raspberry Pi 5 Pedestrian Crossing Traffic Light (Proteus Simulation): the Raspberry Pi 5 showing the cars red and the green man, the buzzer ticking for the crossing
Proteus library · File 1 of 1

Raspberry Pi 5 Pedestrian Crossing Traffic Light in Proteus Simulation V1.0

Raspberry Pi 5 Pedestrian Crossing Traffic Light in Proteus Simulation V1.0 comes as a ZIP archive of 150 files (14.8 MB, 30.4 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, source code and a nested archive.

  • LIBProteus library
  • DLLProteus model
  • DSNProteus simulation
  • SRCSource code
  • ZIPNested archive

Description

Raspberry-Pi-5-Pedestrian-Crossing-Traffic-Light-Proteus-Simulation-v1.0.zip: the complete Proteus simulation project (Raspberry Pi 5, SMD LEDs, an amber 5 mm LED, SMD resistors, a push button, a 4-way DIP switch, a slide switch, an active buzzer, the Laptop and Mobile WiFi Monitors), the Python program pedestrian_crossing.py, every LIB and DLL the simulation needs, the TEPPi Python runtime and a README.

Read Raspberry Pi 5 Pedestrian Crossing Traffic Light (Proteus Simulation)

File Structure

13b9f30131b94d5086f6962342ebdb68.zip150 files · 24 folders · 30.4 MB unpacked
Pi-5-Pedestrian-Crossing-TEP-v1.0/150 files · 30.4 MB
Proteus Library Files/10 files · 2.0 MB
LIB TEPBUTTON.LIBProteus library 20.7 KB
LIB TEPBUZZER.LIBProteus library 9.9 KB
LIB TEPDIP.LIBProteus library 1.6 MB
LIB TEPLAPTOP.LIBProteus library 39.5 KB
LIB TEPLEDCOLOUR.LIBProteus library 21.9 KB
LIB TEPMOBILE.LIBProteus library 13.1 KB
LIB TEPRPI5.LIBProteus library 60.5 KB
LIB TEPSLIDE.LIBProteus library 13.2 KB
LIB TEPSMDLED.LIBProteus library 17.7 KB
LIB TEPSMDRES.LIBProteus library 171.9 KB
Proteus Model Files/128 files · 23.5 MB
TEPPi/120 files · 18.7 MB
python/33 files · 17.5 MB
DLL libcrypto-3.dllSimulation model 3.3 MB
DLL libffi-8.dllSimulation model 34.3 KB
DLL libssl-3.dllSimulation model 620.8 KB
TXT LICENSE.txtText file 36 KB
PYD pyexpat.pydPYD file 169.8 KB
CAT python.catCAT file 628.1 KB
EXE python.exeEXE file 99.3 KB
DLL python3.dllSimulation model 65.3 KB
DLL python311.dllSimulation model 4.8 MB
ZIP python311.zipArchive 4.1 MB
_PTH python311._pth_PTH file 80 B
EXE pythonw.exeEXE file 97.8 KB
PYD select.pydPYD file 26.8 KB
DLL sqlite3.dllSimulation model 1.2 MB
PYD unicodedata.pydPYD file 1.1 MB
DLL vcruntime140.dllSimulation model 88.9 KB
PYD winsound.pydPYD file 27.3 KB
PYD _asyncio.pydPYD file 55.8 KB
PYD _bz2.pydPYD file 79.8 KB
PYD _ctypes.pydPYD file 105.8 KB
PYD _decimal.pydPYD file 193.8 KB
PYD _elementtree.pydPYD file 113.8 KB
PYD _hashlib.pydPYD file 48.8 KB
PYD _lzma.pydPYD file 145.8 KB
PYD _msi.pydPYD file 36.8 KB
PYD _multiprocessing.pydPYD file 29.3 KB
PYD _overlapped.pydPYD file 42.3 KB
PYD _queue.pydPYD file 28.8 KB
PYD _socket.pydPYD file 67.3 KB
PYD _sqlite3.pydPYD file 89.3 KB
PYD _ssl.pydPYD file 153.8 KB
PYD _uuid.pydPYD file 22.8 KB
PYD _zoneinfo.pydPYD file 38.8 KB
runtime/87 files · 1.1 MB
Adafruit_BBIO/6 files · 22.6 KB
PYC ADC.pycPYC file 2.1 KB
PYC GPIO.pycPYC file 9.9 KB
PYC PWM.pycPYC file 4.1 KB
PYC UART.pycPYC file 1.3 KB
PYC _pins.pycPYC file 4.7 KB
PYC __init__.pycPYC file 431 B
Adafruit_DHT/1 file · 2.5 KB
PYC __init__.pycPYC file 2.5 KB
arduino/2 files · 17.7 KB
app_utils/1 file · 17.5 KB
PYC __init__.pycPYC file 17.5 KB
PYC __init__.pycPYC file 283 B
colorzero/8 files · 85.3 KB
SRC attr.pySource file 6.5 KB
SRC color.pySource file 37.9 KB
SRC conversions.pySource file 11.1 KB
SRC deltae.pySource file 5.5 KB
SRC easings.pySource file 885 B
SRC tables.pySource file 13.6 KB
SRC types.pySource file 9 KB
SRC __init__.pySource file 878 B
colorzero-2.0.dist-info/5 files · 6.6 KB
TXT LICENSE.txtText file 1.5 KB
FILE METADATAFile 4 KB
FILE RECORDFile 1004 B
TXT top_level.txtText file 10 B
FILE WHEELFile 110 B
gpiozero/27 files · 594.5 KB
fonts/3 files · 12.6 KB
TXT 14seg.txtText file 2.6 KB
TXT 7seg.txtText file 1.1 KB
SRC __init__.pySource file 8.9 KB
pins/11 files · 234.3 KB
SRC data.pySource file 58.5 KB
SRC lgpio.pySource file 12.4 KB
SRC local.pySource file 6.6 KB
SRC mock.pySource file 18.5 KB
SRC native.pySource file 20.7 KB
SRC pi.pySource file 27.8 KB
SRC pigpio.pySource file 21.1 KB
SRC rpigpio.pySource file 7.1 KB
SRC spi.pySource file 7.7 KB
SRC style.pySource file 2.7 KB
SRC __init__.pySource file 51.2 KB
SRC boards.pySource file 100.9 KB
SRC compat.pySource file 1.2 KB
SRC devices.pySource file 24.3 KB
SRC exc.pySource file 7.4 KB
SRC input_devices.pySource file 53.6 KB
SRC internal_devices.pySource file 26.1 KB
SRC mixins.pySource file 20.5 KB
SRC output_devices.pySource file 60.5 KB
SRC spi_devices.pySource file 19.6 KB
SRC threads.pySource file 1.6 KB
SRC tones.pySource file 8.4 KB
SRC tools.pySource file 20.9 KB
SRC __init__.pySource file 2.6 KB
gpiozero-2.0.1.post3.dist-info/6 files · 14.6 KB
TXT entry_points.txtText file 539 B
RST LICENSE.rstRST file 1.4 KB
FILE METADATAFile 9.7 KB
FILE RECORDFile 2.8 KB
TXT top_level.txtText file 21 B
FILE WHEELFile 92 B
Jetson/2 files · 8.2 KB
GPIO/1 file · 7.9 KB
PYC __init__.pycPYC file 7.9 KB
PYC __init__.pycPYC file 264 B
micropython/11 files · 142.1 KB
PYC dht.pycPYC file 3.4 KB
PYC ds18x20.pycPYC file 3.8 KB
PYC framebuf.pycPYC file 17.5 KB
PYC machine.pycPYC file 55.2 KB
PYC micropython.pycPYC file 3.3 KB
PYC network.pycPYC file 10.8 KB
PYC ntptime.pycPYC file 1.5 KB
PYC onewire.pycPYC file 4.2 KB
PYC requests.pycPYC file 7.3 KB
PYC rp2.pycPYC file 2.5 KB
PYC tep_mpy.pycPYC file 32.6 KB
OPi/2 files · 14.8 KB
PYC GPIO.pycPYC file 14.5 KB
PYC __init__.pycPYC file 283 B
RPi/2 files · 17.6 KB
PYC GPIO.pycPYC file 17.4 KB
PYC __init__.pycPYC file 257 B
serial/2 files · 15.2 KB
PYC serialutil.pycPYC file 691 B
PYC __init__.pycPYC file 14.5 KB
smbus2/1 file · 12.8 KB
PYC __init__.pycPYC file 12.8 KB
PYC adafruit_dht.pycPYC file 3.6 KB
PYC board.pycPYC file 1.7 KB
PYC lgpio.pycPYC file 37 KB
PYC smbus.pycPYC file 418 B
PYC spidev.pycPYC file 6.2 KB
PYC tep_opi.pycPYC file 7 KB
PYC tep_pi.pycPYC file 37.3 KB
PYC tep_pi_boot.pycPYC file 10.6 KB
PYC tep_pi_fs.pycPYC file 23.7 KB
PYC tep_pi_net.pycPYC file 28.7 KB
PYC tep_pi_w1.pycPYC file 8.8 KB
PYC wiringpi.pycPYC file 16.9 KB
DLL TEPBUTTON.DLLSimulation model 274 KB
DLL TEPBUZZER.DLLSimulation model 276 KB
DLL TEPDIP.DLLSimulation model 279.5 KB
DLL TEPLEDCOLOUR.DLLSimulation model 289.5 KB
DLL TEPNET.DLLSimulation model 2.9 MB
DLL TEPSLIDE.DLLSimulation model 276.5 KB
DLL TEPSMDLED.DLLSimulation model 290.5 KB
DLL TEPSMDRES.DLLSimulation model 305.5 KB
Proteus Simulation/10 files · 4.9 MB
SRC pedestrian_crossing.pySource file 9.5 KB
DSN Pi-5-Pedestrian-Crossing.pdsprjProteus simulation 35.8 KB
DLL TEPBUTTON.DLLSimulation model 274 KB
DLL TEPBUZZER.DLLSimulation model 276 KB
DLL TEPDIP.DLLSimulation model 279.5 KB
DLL TEPLEDCOLOUR.DLLSimulation model 289.5 KB
DLL TEPNET.DLLSimulation model 2.9 MB
DLL TEPSLIDE.DLLSimulation model 276.5 KB
DLL TEPSMDLED.DLLSimulation model 290.5 KB
DLL TEPSMDRES.DLLSimulation model 305.5 KB
Python Code/1 file · 9.5 KB
SRC pedestrian_crossing.pySource file 9.5 KB
TXT README.txtText file 11 KB

README

README.txt 152 lines
===============================================================================================================
  Raspberry Pi 5 Pedestrian Crossing Traffic Light (Proteus Simulation) - Project V1.0
  The Engineering Projects - www.TheEngineeringProjects.com
===============================================================================================================

IMPORTANT LINKS
  The project tutorial (circuit, code, simulation results):
 https://www.theengineeringprojects.com/2026/11/raspberry-pi-5-pedestrian-crossing-traffic-light-proteus-simulation.html
  The libraries this project is built from (each post has its own full download and tutorial):
    Raspberry Pi 5 board:
      https://www.theengineeringprojects.com/2026/10/raspberry-pi-5-library-for-proteus.html
    SMD LED:
      https://www.theengineeringprojects.com/2026/11/smd-led-library-for-proteus.html
    Designer colour LED:
      https://www.theengineeringprojects.com/2026/11/designer-colour-led-library-for-proteus.html
    DIP switch:
      https://www.theengineeringprojects.com/2026/11/dip-switch-library-for-proteus.html
    Slide switch:
      https://www.theengineeringprojects.com/2026/11/slide-switch-library-for-proteus.html
    SMD resistor:
      https://www.theengineeringprojects.com/2026/11/smd-resistor-library-for-proteus.html
    Push button:
      https://www.theengineeringprojects.com/2026/11/push-button-library-for-proteus.html
    Active buzzer:
      https://www.theengineeringprojects.com/2026/11/active-buzzer-library-for-proteus.html
    Laptop WiFi Monitor:
      https://www.theengineeringprojects.com/2026/10/laptop-wifi-monitor-library-for-proteus.html
    Mobile WiFi Monitor:
      https://www.theengineeringprojects.com/2026/10/mobile-wifi-monitor-library-for-proteus.html
  Support our free work: https://www.theengineeringprojects.com/donate

FILE STRUCTURE
Pi-5-Pedestrian-Crossing-TEP-v1.0/
|-- Proteus Library Files/
|   |-- TEPBUTTON.LIB                                  20.7 KB   a part of the project -> LIBRARY folder
|   |-- TEPBUZZER.LIB                                   9.9 KB   a part of the project -> LIBRARY folder
|   |-- TEPDIP.LIB                                     1.63 MB   a part of the project -> LIBRARY folder
|   |-- TEPLAPTOP.LIB                                  39.5 KB   a part of the project -> LIBRARY folder
|   |-- TEPLEDCOLOUR.LIB                               21.9 KB   a part of the project -> LIBRARY folder
|   |-- TEPMOBILE.LIB                                  13.1 KB   a part of the project -> LIBRARY folder
|   |-- TEPRPI5.LIB                                    60.5 KB   a part of the project -> LIBRARY folder
|   |-- TEPSLIDE.LIB                                   13.2 KB   a part of the project -> LIBRARY folder
|   |-- TEPSMDLED.LIB                                  17.7 KB   a part of the project -> LIBRARY folder
|   |-- TEPSMDRES.LIB                                 171.9 KB   a part of the project -> LIBRARY folder
|-- Proteus Model Files/
|   |-- TEPBUTTON.DLL                                 274.0 KB   a model -> MODELS folder
|   |-- TEPBUZZER.DLL                                 276.0 KB   a model -> MODELS folder
|   |-- TEPDIP.DLL                                    279.5 KB   a model -> MODELS folder
|   |-- TEPLEDCOLOUR.DLL                              289.5 KB   a model -> MODELS folder
|   |-- TEPNET.DLL                                     2.90 MB   a model -> MODELS folder
|   |-- TEPSLIDE.DLL                                  276.5 KB   a model -> MODELS folder
|   |-- TEPSMDLED.DLL                                 290.5 KB   a model -> MODELS folder
|   |-- TEPSMDRES.DLL                                 305.5 KB   a model -> MODELS folder
|   |-- TEPPi/python/                                 17.54 MB   Python 3.11 embeddable -> MODELS\TEPPi (33 files)
|   |-- TEPPi/runtime/                                 1.11 MB   TEP Pi runtime, gpiozero -> MODELS\TEPPi (87 files)
|-- Proteus Simulation/
|   |-- pedestrian_crossing.py                          9.5 KB   the program PI1 runs
|   |-- Pi-5-Pedestrian-Crossing.pdsprj                35.8 KB   the project simulation
|   |-- TEPBUTTON.DLL                                 274.0 KB   copy of the model
|   |-- TEPBUZZER.DLL                                 276.0 KB   copy of the model
|   |-- TEPDIP.DLL                                    279.5 KB   copy of the model
|   |-- TEPLEDCOLOUR.DLL                              289.5 KB   copy of the model
|   |-- TEPNET.DLL                                     2.90 MB   copy of the model
|   |-- TEPSLIDE.DLL                                  276.5 KB   copy of the model
|   |-- TEPSMDLED.DLL                                 290.5 KB   copy of the model
|   |-- TEPSMDRES.DLL                                 305.5 KB   copy of the model
|-- Python Code/
|   |-- pedestrian_crossing.py                          9.5 KB   the program (the same file)
|-- README.txt                                        ~10.1 KB   this file
Total: 30.40 MB (unzipped). The C++ source code of the models is not included.

WHAT IS IT?
  A push-button pedestrian crossing you can run in Proteus: a Raspberry Pi 5 runs the cars' lights and the red and
  green man, lights WAIT when someone presses the button, ticks the buzzer for blind people while they may cross,
  takes its timings from a DIP switch, flashes amber at night and serves a web dashboard.
    * The cars' red, amber and green: SMD LEDs (LEDSMDREDTEP, LEDSMDAMBERTEP, LEDSMDGREENTEP) on GPIO17, 27, 22 (pins
      11, 13, 15); the red man and the green man on GPIO23, 24 (pins 16, 18); each through a 220 ohm SMD resistor
      (RESISTORSMD1206TEP), the cathodes to GND.
    * The WAIT lamp: an amber 5 mm LED (LED5MMAMBERTEP) on GPIO25 (pin 22) through 220 ohm.
    * SW1 the push button (BUTTONGREENTEP) from 3V3 to GPIO5 (pin 29).
    * SW2 a 4-way DIP switch (DIPSWITCH4TEP): pins 5 - 8 on 3V3, switches 1 - 4 to GPIO6, 13, 19, 26 (pins 31, 33,
      35, 37).
    * R7 - R11 10 kohm SMD pull-downs hold GPIO5 and the four DIP inputs LOW while their switches are open.
    * SW3 a slide switch (SWITCHSLIDETEP): C to GPIO12 (pin 32), leg 1 to GND (DAY), leg 3 to 3V3 (NIGHT).
    * BZ1 an active buzzer (BUZZERACTIVETEP) on GPIO18 (pin 12).
    * RASPBERRY PI 5 (PI1) runs pedestrian_crossing.py on Ethernet at 192.168.1.51 (port 8000).
    * Laptop WiFi Monitor (PC1) and Mobile WiFi Monitor (MOB1) open http://192.168.1.51:8000/.
  The sequence (at the top of the program): the cars green at least 20 s; a request lights WAIT; amber 3 s; all red
  1 s; the green man for the walk time with fast ticks; the green man flashing 4 s (silent); red and amber 2 s; green.
  The DIP switch: 1 and 2 = the walk time 6, 8, 10 or 12 s; 3 = the ticks; 4 = the red-and-amber step. NIGHT: the
  cars' amber flashes; a request still gets a crossing.
  Its pages:
    /          the dashboard: the state, the wait, the crossings, the settings, the events
    /request   a crossing request (as the button)        /data      everything as JSON
  No extra Python library: lgpio (in the TEPPi runtime and on Raspberry Pi OS), threading, http.server.

TEST STATUS
  Tested in Proteus 8 Professional on Windows 11, the run that made the tutorial's screenshots (the program's times):
  - DIP switches 1, 3 and 4 on: 3.3 s "DIP 1011: walk 8 s, ticks on, red-and-amber on"; the DIP pop-up 1101 = 13,
    500 uA in each closed contact (into its 10 kohm pull-down).
  - 8.0 s PUSH TO CROSS (11 bounce edges in 5.22 ms, one request): WAIT lit, the cars kept green; the laptop showed
    "CARS GREEN - WAIT 3.3 s". 20.0 s cars AMBER (the 20 s minimum green); 24.0 s "WALK: the green man for 8 s
    (waited 16.0 s)" with the ticks; 32.0 s the green man flashing (silent); 36.0 s red and amber; 38.0 s cars GREEN
    again - crossing 1 done.
  - 41.9 s the slide switch to NIGHT: the cars' amber flashing. 46.0 s REQUEST from the laptop; 46.9 s amber; 50.9 s
    WALK (waited 4.9 s); 64.9 s crossing 2 done, back to flashing amber.
  - The buzzer counted 80 ticks (five a second, two 8 s walks); the lamps drew about 14 mA each in the simulation.
  - 69.6 s of simulation in 353 s.

INSTALLATION
  1. Close Proteus. Extract the WHOLE zip file, for example to your Desktop.
  2. Copy the files from "Proteus Library Files" into the LIBRARY folder of Proteus, for example
     C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY
  3. Copy everything in "Proteus Model Files" - the DLL files and the TEPPi folder - into the MODELS folder (next
     to LIBRARY).
  4. Start Proteus. Press P in the schematic and search for RASPBERRY PI 5, LEDSMDREDTEP or DIPSWITCH4TEP to check
     that the parts are there.

RUN THE SIMULATION
  1. Open "Proteus Simulation\Pi-5-Pedestrian-Crossing.pdsprj". Keep pedestrian_crossing.py and the DLL files beside
     it.
  2. Press Play. The cars have green and the red man shows.
  3. Press the button (SW1): WAIT lights; after the cars' minimum green the crossing runs.
  4. Flip the DIP switches for another walk time, the ticks or the red-and-amber step; slide SW3 to NIGHT.
  5. Open the Laptop WiFi Monitor (PC1) or the Mobile WiFi Monitor (MOB1) and press Go: REQUEST.
  Your own program: edit pedestrian_crossing.py.

PROPERTIES USED IN THIS PROJECT
  PI1 RASPBERRY PI 5           PROGRAM=pedestrian_crossing.py, ETHERNET=IN (192.168.1.51)
  D1 - D5 SMD LEDs             red, amber, green (the cars); red, green (the people);  D6 LED5MMAMBERTEP (WAIT)
  R1 - R6 RESISTORSMD1206TEP   220 ohm;  R7 - R11 10 kohm (the pull-downs)
  SW1 BUTTONGREENTEP;  SW2 DIPSWITCH4TEP;  SW3 SWITCHSLIDETEP;  BZ1 BUZZERACTIVETEP
  PC1, MOB1                    HOMEPAGE=http://192.168.1.51:8000/

TROUBLESHOOTING
  * A light never comes on: its LED is the wrong way round (A to the resistor, K to GND) or its GPIO is wrong.
  * The button does nothing: it must go to 3V3, with R7 (10 kohm) from GPIO5 to GND.
  * The DIP switches read wrong: pins 5 - 8 go to 3V3; switch k joins pin k to pin 9 - k.
  * The terminal cannot start Python: the TEPPi folder is not in MODELS.

LICENCES
  * The project, the program, the parts (LIB files) and the models (DLL files) are made by The Engineering Projects
    and are free for learning and for your own projects. The models use only standard Windows libraries.
    The C++ source code of the models is not included; the source code is not included for any model.
  * TEPPi\python is the Python 3.11 Windows embeddable package (Python Software Foundation License); TEPPi\runtime
    holds our TEP Pi runtime with gpiozero and colorzero (BSD licences) - their licence files are inside the folders.
  * Proteus is a product of Labcenter Electronics and is not included. Raspberry Pi is a trademark of Raspberry Pi
    Ltd. This project is not made or endorsed by them. It is a teaching model, not a road traffic controller.

VERSION
  V1.0 - the first release of the project.
===============================================================================================================
Advertisement

Development1 release

  1. V1.0Raspberry Pi 5 Pedestrian Crossing Traffic Light in Proteus Simulation V1.0this page

    V1.0 is the only release in the Download Center so far. When a newer version is published, it appears above with its own download page.

Installation7 steps

From the download to a working project, in order. The steps follow what the package contains.

You will need

  • Proteus Design SuiteProteus 8 or newer (Labcenter), on Windows
  • Pythonto build the source files into firmware
  • Any archive toolWindows, macOS and Linux extract ZIP files on their own

Steps

  1. 1

    Extract the archive

    Right-click 13b9f30131b94d5086f6962342ebdb68.zip and choose Extract All (or open it with 7-Zip or WinRAR) into a folder you can find again. Keep its folder structure (Pi-5-Pedestrian-Crossing-TEP-v1.0) as it is.

  2. 2

    Copy the library files into Proteus

    Move TEPBUTTON.LIB, TEPBUZZER.LIB and TEPDIP.LIB and 7 more and the files into the LIBRARY folder of your Proteus installation: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY for Proteus 8, or the matching Proteus 7 folder. Older versions keep it under ProgramData\Labcenter Electronics. If Proteus is open, close it first.

  3. 3

    Add the simulation model

    Copy TEPBUTTON.DLL, TEPBUZZER.DLL and TEPDIP.DLL and 12 more into the MODELS folder next to LIBRARY, so the component can run, not only be drawn.

  4. 4

    Restart Proteus and place the component

    Start Proteus, open a schematic, press P (Pick Devices) and search for the component by the name used in the tutorial. It appears with its pins ready to wire.

  5. 5

    Build the source code

    Open pedestrian_crossing.py, attr.py and color.py and 28 more in the compiler named in the tutorial (MikroC, Keil, MPLAB, Code Composer or the Arduino IDE) and build it to get the firmware.

  6. 6

    Open the example simulation

    Open Pi-5-Pedestrian-Crossing.pdsprj in Proteus to see the wiring exactly as in the tutorial. Check the controller's Program File path, then press Play.

  7. 7

    Follow the tutorial

    Raspberry Pi 5 Pedestrian Crossing Traffic Light (Proteus Simulation) explains every connection and setting in order; keep it open beside the files while you build.

How to add a library in Proteus 8

FAQs8 questionsContact TEP

How do I download Raspberry Pi 5 Pedestrian Crossing Traffic Light in Proteus Simulation V1.0?

Wait for the 30-second guest countdown on this page, then press the download button; the file comes straight from our storage. Members who are logged in skip the wait. If the browser opens the file instead of saving it, use its Save as option. The download link is made for you when the countdown ends and works for 15 minutes; a saved or shared link stops working, so share this page instead.

What is inside the archive?

Raspberry Pi 5 Pedestrian Crossing Traffic Light in Proteus Simulation V1.0 comes as a ZIP archive of 150 files (14.8 MB, 30.4 MB unpacked) holding Proteus library files, simulation model DLLs, a Proteus simulation, source code and a nested archive. Open the File Structure tab for the full list of 150 files.

What should I do if the download does not start?

Check the browser's download list first; an ad blocker or a company firewall can also hold it back, so try another browser or network. If the file arrives incomplete, download it again. For an installation problem, read the Install tab or tell us in the comments with your software version and the exact error message.

Is this file free?

Yes. Every file in the TEP Download Center is free for learning, personal and student projects. If you share it, link back to this page or the tutorial so others find the latest version.

How do I check that the file arrived complete?

Compare its SHA-256 with the one on this page, 49f3c69b80e755a882c00f7f9d44c8d4e4a77f0861db341b1507dd17b96608b1. In PowerShell run Get-FileHash "13b9f30131b94d5086f6962342ebdb68.zip"; on macOS or Linux run shasum -a 256 "13b9f30131b94d5086f6962342ebdb68.zip". The same value means the file is exactly the one in our storage; a different one means the download broke off, so download it again.

Do I need WinRAR to open the ZIP file?

No. Windows, macOS and Linux open ZIP archives on their own (Extract All, or double-click). WinRAR and 7-Zip work too. Extract the whole archive before using the files.

Where do I put the LIB and IDX files?

Both files go into the LIBRARY folder of your Proteus installation (Proteus 8: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY; Proteus 7 has the same folder under its own name). Restart Proteus afterwards and search for the component with P.

Which Proteus version does the library need?

The tutorial names the Proteus version the library was made and tested with. Most TEP libraries work in Proteus 7 and Proteus 8; if the component does not appear after a restart, check that both the LIB and the IDX file were copied and that Proteus was fully closed while copying.

preparing · 13b9f30131b94d5086f6962342ebdb68.zip
Rating
Your download will be ready shortly
Preparing your download…

Members skip the wait. Log in or join TEP.

Last 14 days0 downloads
SHA-256 49f3c69b80e755a882c00f7f9d44c8d4e4a77f0861db341b1507dd17b96608b1
DocumentationRaspberry Pi 5 Pedestrian Crossing Traffic Light (Proteus Simulation)
Need help with this file? Bug report Ask a question Download problemsGet updates
Advertisement

Comments

0

Join the conversation

Start the conversationAsk a question or share how you used this download.