pcbway




Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginnersHello everyone! I hope you all will be absolutely fine and having fun. Today, I am going to elaborate you, how to make Arduino Projects for beginners. Before gong into the detail of this tutorial first of all I would like to explain you a bit about Arduino. Arduino is an open source micro controller. A lot of help is available online so its user friendly hardware. Most of the students prefer to do work on this device.

Arduino is a low cost high performance device. Due to its cost effectiveness and open source feature it is commonly available in the market these days. An amazing thing about Arduino is that students can take help online with a lot of examples regarding any of the task. There are thousands of Arduino projects are available online from beginner level to the major real life projects. Students can make their own projects without having a lot of programming experience. Arduino kits for the beginners are also available in the market now a days. These kit usually consist of an Arduino board, jumper wires, motors, LED’s, sensors, relays etc. Arduino has a very wide of real life applications including automation, robotics, remote control, LED’s, environmental sensing, Internet of Things (IoT), display, monitoring etc. Further detail about this tutorial will be given later.

Arduino Projects for Beginners

In this section of the tutorial Arduino Projects for beginners, I will elaborate you how to make basic and very simple projects using Arduino which will lead you to the better and better understanding of Arduino environment later. With the help of such a projects you will be much confident and will be able to make large projects too. So here I am going to share some of the basic and beginners level Arduino projects from my blog.

Arduino Basic Projects

In this section I will provide Proteus ISIS libraries for the different Arduino boards e.g. Arduino Nano, Arduino UNO, Arduino Mega 2560 etc and other different projects too. Here is the list of those projects.

  1. Getting Started with Arduino Software
  2. Arduino Library for Proteus
  3. Arduino UNO Library for Proteus
  4. Arduino Genuino Library for Proteus
  5. Arduino Lilypad Library for Proteus
  6. Arduino Mega 2560 Library for Proteus
  7. Arduino Nano Library for Proteus
  8. Arduino Pro Mini Library for Proteus
  9. Arduino UNO PCB Design for Proteus
  10. Arduino Library for Seven Segment Display
  11. How to get .hex File from Arduino
  12. How to use Arduino Software Serial
  13. How to use Arduino Serial Flush
  14. How to use Arduino Serial Read
  15. Ultrasonic Sensor Library for Proteus
  • These are the very basic Arduino Projects, a student must go through all of these projects for the better understanding of the other projects.
  • Now, I am going to share all of the mini projects designed by our team using Arduino board.

1. A Simple Arduino LED Example in Proteus

In this tutorial I have shared an LED control example using Arduino UNO in Proteus ISIS. I have designed the circuit to control a single LED using Arduino in Proteus. First I have testes and verified the control of an LED using Arduino.

After its successful testing I have designed another circuit in Proteus to control a bundle of LED using the Same Arduino board. You can also check the blinking of an on board LED attached to the pin 13 of Arduino board. I have provided the complete Proteus ISIS design and Arduino source code for your easiness.

  • You can download the entire package here by clicking on the button below.

Download Simulation

  • Download .rar file, extract it and enjoy the simulation.

2. Circuit Designing of LCD with Arduino in Proteus

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginnersIn this tutorial I have shared the design of a circuit for LCD interfacing with Arduino UNO in Proteus ISIS. I have used LCD here basically for debugging purpose in order to check whether the Arduino source code is in working condition or not.

I have designed the Proteus simulation first and then I wrote source code in Arduino software. At the end after uploading .hex file in Arduino I have verified the code as show in the figure.

  • You can download the entire package here by clicking on the button below.

Download Simulation

  • Click on the button above and go through the detailed discussion.

3. Interfacing of Keypad with Arduino in Proteus ISIS

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

In this article I have elaborated the circuit designing of keypad with Arduino UNO. I have used 4*3 keypad. Keypads are most common in a lot of real life applications such as calculators, laptops, ATM machined etc. The functionality of keypad is based on matrix systems.

I have interfaced Arduino UNO, LCD and keypad in such a way that the text is displayed on LCD with respect to the corresponding buttons pressed from the keypad.

  • You can download the entire package here by clicking on the button below.

Download Simulation

  • Download the file, extract it and enjoy the simulation.

4. Scrolling Text on LED Matrix 8*8 using Arduino in Proteus ISIS

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

This part of this tutorial will explain the design for scrolling text on LED matrix 8*8 using Arduino in Proteus ISIS. I have used an LED matrix. It is basically used to display long messages that we want to write on it.

I have designed the complete circuit simulation in Proteus ISIS. Then I have written the Arduino source code. After uploading the code I have verified the results as well. They were absolutely perfect. Our team has done a lot of hard work to design this project. So, I have imposed a very lost on it that a student can easily buy this project even with his pocket money.

  • You can buy this project here by clicking on the button below.

Buy Simulation & Arduino Source Code

5. Ultrasonic Sensor Simulation in Proteus

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

This article presents the detailed discussion about the circuit designing for interfacing of SONAR with Arduino UNO. I have used the library for ultrasonic sensor whose link is given above. This sensor is very to interface using this library.

I have shared three type of examples regarding ultrasonic sensor interfacing with Arduino in Proteus ISIS. These examples include ultrasonic sensor interfacing using buttons, as a proximity switch and as a switch. I have provided both Proteus simulation as well as Arduino source code.

  • You can download the entire package here by clicking on the button below.

Download Simulation

  • Download the file, extract it and enjoy the simulation.

6. Interfacing of Temperature Sensor 18B20 with Arduino

 

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

The detailed discussion about circuit designing and interfacing of temperature sensor with Arduino UNO is given in this section of the tutorial Arduino projects for beginners. I have used non-water proof temperature sensor.

I have used an LCD as well to print the values obtained from the temperature sensor. We can get the values of temperature in Celsius using 18B20. There is a library for Arduino while interfacing 18B20 with it. I have shared that library too.

  • You can download the entire package containing both simulation and Arduino library for 18B20 here by clicking on the button below.

Download Library & Simulation

  • Download the file, extract it and enjoy the simulation.

7. Interfacing of Temperature Sensor LM35 with Arduino in Proteus ISIS

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

This section of the tutorial Arduino projects for beginners, will provide you the discussion about the circuit designing of L35 interfacing with Arduino in Proteus. LM35 is a low cost sensor as compared to the other temperature sesnsors e.g. 18B20.

I have designed the circuit in Proteus ISIS first and then I have written the code in Arduino software. After that I have tested the written code and verified the results. There were absolutely accurate. I have provided both simulation and code for free.

  • You can download the entire package here by clicking on the button below.

Download Simulation & Code

  • Download the file, extract it and enjoy the simulation.

8. Interfacing PIR Sensor with Arduino

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

The detailed discussion about the interfacing of PIR sensor with Arduino is given in this section of the tutorial Arduino projects for beginners. PIR sensor is designed for motion detection purposes. PIR sensor is a passive device and does not generate its own voltages and energy.

I have provided the complete circuit diagram of PIR interfacing with Arduino as well as the source code in Arduino software. You can also read the detailed discussion here by clicking on the button below.

Download Simulation

  • Download source code and circuit diagram and enjoy the simulation.

9. Interfacing Flame Sensor with Arduino

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

In this section of the tutorial Arduino projects for beginners, I have given the detailed discussion about interfacing flame sensor with Arduino UNO. Flame sensor is designed basically fire detection purposes or you can say for temperature monitoring purposes. You have to set a threshold value and above that value an LED on the top of the sensor will be turn on as an indication.

I have designed its Proteus ISIS simulation first. Then I have written its source code in Arduino software. I have uploaded the code in Arduino in Proteus and observed the results, they were quite accurate. You have to change the state of logic state from 0 to 1. As the state becomes the sensor will start working and a corresponding test will be displayed on LCD. I have provided the complete simulation and source code for this project.

  • You can download the entire package here by clicking on the button below.

Download Simulation & Arduino Source Code

  • Download source code and circuit diagram and enjoy the simulation.

10. Interfacing NRF24L01 Sensor with Arduino

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

This section of the tutorial Arduino projects for beginners, will give you the detailed discussio nabout the interfacing of NRF24L01 sensor with Arduino UNO. NRF24L01 is basically used for wireless communication between two different nodes.It operates on a frequency equal to WiFi frequency i.e. 2.4GHz. This sensor has a capability to send and receive data at the same time.

I have provided Arduino library for NRF24L01, complete circuit diagram and Arduino source code for this project for free. You can easily design your own circuit with the help of this article.

  • You can download the entire simulation and source code here by clicking on the button below.

Download Simulation & Arduino Source Code

  • Download source code and circuit diagram and enjoy the simulation.

11. Interfacing RFID RC522 with Arduino

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

In this section I will elaborate you the method for interfacing RFID RC522 with Arduino. I have used a breadboard and jumper wires to make a connection between RFID RC522 and Arduino UNO. RFID RC522 is used in the projects where there is a need of wireless communication between laptop/PC and the micro controller.

I have provide the pins configuration of Arduino as well as RFID RC522 sensor. I have also provided the library for RFID, a complete circuit diagram of in terfacing this module with Arduino as well as the source code to operate this module.

  • You can download the library, circuit diagram and source code here by clicking on the button below.

Download Simulation & Arduino Source Code

  • Download source code and circuit diagram and enjoy the simulation.

12. Control Servo Motor with Arduino in Proteus

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

This section of the tutorial Arduino Projects for Beginners, will provide explanation about control of a servo motor with Arduino in Proteus ISIS. Servo motor is commonly used in the projects where there is a need of high precision like CNC machines, robotics are such fields where high precised results are required. So, servo motors are the best option in such cases.

I have designed a complete circuit for interfacing of a stepper motor with Arduino UNO in Proteus ISIS. I have provided the complete Arduino source code as well. After uploading the source code in Arduino you will be able to control the servo motor in Proteus ISIS.

  • You can download the complete simulation and source code here by clicking on the button below.

Download Simulation & Arduino Source Code

  • Download source code and circuit diagram and enjoy the simulation.

13. Home Automation Project using XBee and Arduino

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

In this tutorial I have explained all of the steps about making a home automation project using XBee and Arduino UNO. Now a says, since every thing is going under automation. So, I thought to design a pretty simple automation projects named as home automation project. Home automation project has the features e.g. you can control the entire appliances of the home from your PC or Laptop sitting anywhere in the world. This features required internet services.

First of all I have designed the complete circuit as shown in the figure as well. I have designed the circuit to control the home using remote. I have written Arduino source code and after uploading the code in Arduino I have tested the projects and it was operating well. Our team has designed this project with a lot of hard work so we have imposed a very small amount of cost on it. Even a student can but this project with his/her pocket money.

  • You buy the complete simulation as well the Arduino source code here by clicking on the button below.

Buy Simulation & Arduino Code

14. GSM Based Home Security System using Arduino

Arduino projects for beginners, basics of Arduino, Arduino basics, how to make simple projects using Arduno, Arduino simple projects, Arduino basic projects, Arduino for beginners, how to make Arduino projects for beginners

In this section of the tutorial Arduino projects for beginners, I have explained all of the necessary steps to design a GSM based home security system using Arduino. Some of people are very conscious and they want to secure there houses at any cost. So basically this type of project is pretty suitable for them.

I have designed a complete Proteus ISIS simulation for home security system using Arduino and GSM. Then I have written a complete Arduino Source code and after uploading it on the Arduino board in Proteus I have tested the results which were quite efficient and precise. This project took a lot of hard work and time. So, we have imposed a small amount of cost on it as well.

  • You can buy this project easily here by clicking on the button below, its not costly at all.

Buy Simulation & Arduino Code

This tutorial contains a detailed discussion of Arduino Projects for Beginners. I have a lot of basic Arduino projects. Some of them were free of cost and some projects are assigned with a small amount cost. I have tried to share different easy and moderate level Arduino projects. If you have any problem you can freely ask us. Me and my team is 24/7 available here to entertain you and to help you out in some good manner. I will share other informative and helpful tutorials in my upcoming articles. Till then, Taker Care 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *

Post comment